#ifndef GEOCENT_H
#define GEOCENT_H 1

/***************************************************************************/
/* RSC IDENTIFIER:  GEOCENTRIC
 *
 * ABSTRACT
 *
 *    This component provides conversions between Geodetic coordinates (latitude,
 *    longitude in radians and height in meters) and Geocentric coordinates
 *    (X, Y, Z) in meters.
 *
 * ERROR HANDLING
 *
 *    This component checks parameters for valid values.  If an invalid value
 *    is found, the error code is combined with the current error code using 
 *    the bitwise or.  This combining allows multiple error codes to be
 *    returned. The possible error codes are:
 *
 *      GEOCENT_NO_ERROR        : No errors occurred in function
 *      GEOCENT_LAT_ERROR       : Latitude out of valid range
 *                                 (-90 to 90 degrees)
 *      GEOCENT_LON_ERROR       : Longitude out of valid range
 *                                 (-180 to 360 degrees)
 *      GEOCENT_A_ERROR         : Semi-major axis less than or equal to zero
 *      GEOCENT_INV_F_ERROR     : Inverse flattening outside of valid range
 *								                 (250 to 350)
 *
 *
 * REUSE NOTES
 *
 *    GEOCENTRIC is intended for reuse by any application that performs
 *    coordinate conversions between geodetic coordinates and geocentric
 *    coordinates.
 *    
 *
 * REFERENCES
 *    
 *    An Improved Algorithm for Geocentric to Geodetic Coordinate Conversion,
 *    Ralph Toms, February 1996  UCRL-JC-123138.
 *    
 *    Further information on GEOCENTRIC can be found in the Reuse Manual.
 *
 *    GEOCENTRIC originated from : U.S. Army Topographic Engineering Center
 *                                 Geospatial Information Division
 *                                 7701 Telegraph Road
 *                                 Alexandria, VA  22310-3864
 *
 * LICENSES
 *
 *    None apply to this component.
 *
 * RESTRICTIONS
 *
 *    GEOCENTRIC has no restrictions.
 *
 * ENVIRONMENT
 *
 *    GEOCENTRIC was tested and certified in the following environments:
 *
 *    1. Solaris 2.5 with GCC version 2.8.1
 *    2. Windows 95 with MS Visual C++ version 6
 *
 * MODIFICATIONS
 *
 *    Date              Description
 *    ----              -----------
 *
 *
 */

#include <ossim/base/ossimConstants.h>


/***************************************************************************/
/*
 *                              DEFINES
 */
  #define GEOCENT_NO_ERROR        0x0000
  #define GEOCENT_LAT_ERROR       0x0001
  #define GEOCENT_LON_ERROR       0x0002
  #define GEOCENT_A_ERROR         0x0004
  #define GEOCENT_INV_F_ERROR     0x0008


/***************************************************************************/
/*
 *                              FUNCTION PROTOTYPES
 */

/* ensure proper linkage to c++ programs */
#ifdef __cplusplus
extern "C" {
#endif


   OSSIM_DLL long Set_Geocentric_Parameters (double a, double f);
/*
 * The function Set_Geocentric_Parameters receives the ellipsoid parameters
 * as inputs and sets the corresponding state variables.
 *
 *    a  : Semi-major axis of ellipsoid, in meters.          (input)
 *    f  : Flattening of ellipsoid.						               (input)
 */


   OSSIM_DLL void Get_Geocentric_Parameters (double *a, double *f);
/*
 * The function Get_Geocentric_Parameters returns the ellipsoid parameters
 * to be used in geocentric coordinate conversions.
 *
 *    a  : Semi-major axis of ellipsoid, in meters.          (output)
 *    f  : Flattening of ellipsoid.						               (output)
 */


   OSSIM_DLL long Convert_Geodetic_To_Geocentric (double Latitude,
                                                  double Longitude,
                                                  double Height,
                                                  double *X,
                                                  double *Y,
                                                  double *Z);
/*
 * The function Convert_Geodetic_To_Geocentric converts geodetic coordinates
 * (latitude, longitude, and height) to geocentric coordinates (X, Y, Z),
 * according to the current ellipsoid parameters.
 *
 *    Latitude  : Geodetic latitude in radians                     (input)
 *    Longitude : Geodetic longitude in radians                    (input)
 *    Height    : Geodetic height, in meters                       (input)
 *    X         : Calculated Geocentric X coordinate, in meters.   (output)
 *    Y         : Calculated Geocentric Y coordinate, in meters.   (output)
 *    Z         : Calculated Geocentric Z coordinate, in meters.   (output)
 *
 */


  OSSIM_DLL void Convert_Geocentric_To_Geodetic (double X,
                                                 double Y, 
                                                 double Z,
                                                 double *Latitude,
                                                 double *Longitude,
                                                 double *Height);
/*
 * The function Convert_Geocentric_To_Geodetic converts geocentric
 * coordinates (X, Y, Z) to geodetic coordinates (latitude, longitude, 
 * and height), according to the current ellipsoid parameters.
 *
 *    X         : Geocentric X coordinate, in meters.         (input)
 *    Y         : Geocentric Y coordinate, in meters.         (input)
 *    Z         : Geocentric Z coordinate, in meters.         (input)
 *    Latitude  : Calculated latitude value in radians.       (output)
 *    Longitude : Calculated longitude value in radians.      (output)
 *    Height    : Calculated height value, in meters.         (output)
 */


#ifdef __cplusplus
}
#endif

#endif /* GEOCENT_H */